Vertical internal tray angle L 50x150mm with 90deg bend "PLUS" HD85 KM PL17665 KM SYSTEM

A special shaped section has been developed for changing the direction of the cable route during installation – a vertical external left angle with a 90-degree rotation of the open part of the tray around its axis. This bend prevents damage to the cable route during installation. It is recommended to use the element with a metal sheet tray of the same series with a width of 150 mm and a side height of 50 mm. The product is galvanized by hot-dip method according to GOST 9.307-2021 and is used for installation in rooms with high humidity and low pollution, outdoors, and in low-corrosive environments, in accordance with GOST 15150-69. The connection between sections occurs using suitable fasteners. For additional protection of the cable route element from dust and debris, use the "PLUS" series angle cover.