Vertical internal tray angle L 50x50mm with 90deg route bend "PLUS" HD85 KM PL17675 KM SYSTEM

To change the direction of the cable route during installation, a special shaped section has been developed – a vertical external left corner with a 90-degree rotation of the open part of the tray around its axis. This bend prevents damage to the cable route during installation. It is recommended to use this element with a metal sheet tray of the same series with a width of 50 mm and a side height of 50 mm. The product is hot-dip galvanized according to GOST 9.307-2021 and is used for installation in rooms with high humidity and low pollution, outdoors, and in low-corrosive environments, in accordance with GOST 15150-69. Connection between sections is made using suitable fasteners. For additional protection of the cable route element from dust and debris, use a cover for the "PLUS" series corner.