Vertical tray elbow internal R 50x400mm with 90 degree bend "PLUS" HD85 KM PL17672 KM SYSTEM

Rotating the cable route upwards in a vertical plane at a right angle, while rotating the open part of the tray around its axis, allows for a 90-degree internal right vertical angle of the "PLUS" series. The element is suitable for connection with a metal sheet tray of the same series with a width of 400 mm and a side height of 50 mm. The product is hot-dip galvanized according to GOST 9.307-2021 and is used for installation in rooms with high humidity and low pollution, outdoors, and in low-corrosive environments, in accordance with GOST 15150-69. Integrated into the body are tabs for quick connection with the tray, which facilitate the installation process. Special embossing on the bottom of the product ensures the integrity of the route. The element is part of a system for constructing cable routes of any complexity at industrial, civil, and commercial facilities.