Vertical internal tray angle 90deg. 50x500mm "PLUS" HD85 KM PL17728 SYSTEM KM

90-degree internal vertical angle is designed to perform turns of low-voltage and power lines up to 1000V in the vertical plane at a right angle. The element is part of the "PLUS" series of shaped products. The section is suitable for connection with a metal sheet tray of the same series with a width of 500 mm and a side height of 50 mm. The product is galvanized by hot-dip method according to GOST 9.307-2021 and is used for installation in rooms with high humidity and low pollution, outdoors, and in low-corrosive environments, in accordance with GOST 15150-69. Special connecting tabs on the section body ensure the required rigidity of the butt joint and the integrity of the route. For additional protection of the cable route element from mechanical damage, dust, and debris, use a cover for the "PLUS" series angle.