HUGONG INVERCUT 100 III ГК ТСС 029644 空气等离子切割机

HUGONG INVERCUT 100 III air-plasma cutting machine, HUGONG INVERCUT 100 III – an inverter air-plasma cutting machine is designed for obtaining parts and blanks from sheet metal and various metal profiles, cutting scrap metal, and performing various types of repair work. Cutting is performed by a compressed plasma jet only on electrically conductive materials, such as low-carbon steels (MS), stainless steels (SS), aluminum alloys (AL), copper alloys, titanium, cast iron, etc. Optimal and balanced characteristics for industrial applications. HUGONG INVERCUT 100 III is simple to assemble, set up modes and operate. Everything necessary to start working "out of the box" is already included. The basis of plasma cutting technology is the creation of a compressed electric arc formed between the plasma torch electrode and the workpiece. To create a plasma jet for cutting, compressed air (other gases are also possible) is supplied to the electric arc, which is ionized and turns into plasma with a temperature of about 25000 °C. In addition, the plasma jet exiting from the plasma torch nozzle has supersonic speed, so when performing work on plasma cutting equipment, hearing protection (earmuffs or earplugs) is mandatory. HUGONG INVERCUT 100 III air-plasma cutting machine is developed and manufactured using inverter technology based on the latest IGBT transistors, thanks to which it has high efficiency of electrical energy conversion, low weight and high reliability. HUGONG INVERCUT 100 III implements Mesh Cutting Mode, which allows cutting a workpiece that has holes or voids. In this mode, the device quickly switches between cutting current and standby arc, which allows easy cutting through holes without extinguishing the arc. Wear of consumable parts is significantly reduced. Activating this technological process is carried out by simple switching of the three-way mode selection button on the front control panel of the device. Set the manual plasma cutter to the working position relative to the workpiece and press the trigger. Attention: after using the mesh cutting mode, it is necessary to ensure that the device is in normal cutting mode. If this is not done and cutting continues in mesh cutting mode, it will negatively affect the service life of the nozzles. HUGONG INVERCUT 100 III allows to significantly increase productivity and cutting quality with minimal requirements for worker qualification. COMPLETION Power source with cable and installed plug Manual plasma cutter P-80 with hose pack (5 m) Cable with grounding terminal (3 m) Inlet compressed air filter-regulator Hose for connection to the air line (3.5 m) Starter kit of spare parts for the cutter Operating manual in Russian Warranty card (warranty period 5 years)