Capacitance and Inductance Meter (RLC Meter) MS8360E Mastech 13-2028

Multimeter — an electrical measuring instrument that includes several functions and a set of measurable parameters. All MS8360 series devices measure DC and AC voltage, as well as DC and AC current, and circuit resistance. With this device, you can perform diode testing, continuity testing, and transistor gain measurement. Additionally, the MS8360E multimeter is equipped with a special sensor (NCV), which allows you to non-contactly determine if there is voltage in a section, for example, in a socket; if there is a need to dismantle it, you can immediately find out if there is voltage in it using this multimeter. Thus, one device can replace several devices at once. However, this multimeter is focused on measuring capacitance and inductance, which is why it is also called a capacitance and inductance meter. The MS8360E device is a portable multimeter; its compact size allows you to always carry it with you. But despite its size, this multimeter possesses wide functionality, which distinguishes it from others. The device has a DATA HOLD function for cases when measurements are performed in hard-to-reach places and there is not always an opportunity to look at the screen. The device display is equipped with a backlight, which allows performing measurements even in low-light areas. Engineers strove to make the device as convenient as possible for use. The selection of measurable quantities and measurement ranges is performed using a reinforced rotary selector, which eliminates the possibility of accidental pressing. The device is made of high-quality materials; calibration and testing of the devices were performed under the control of the SDS company. Characteristics: DC voltage: 200 mV/2 V/20 V/200 V/600 V (±0.5%+2) AC voltage: 2 V/20 V/200 V/600 V (0.8%+3) DC current: 200 μA (±1.0 % +5), 10 A (±2.0%+5) AC current: 200 μA (±1.5 % +5), 10 A (±3.0%+5) Resistance: 200 Ohm/2 kOhm/20 kOhm/200 kOhm/2 MOhm (±0.8% +5), 20 MOhm (±5.0%+5) Capacitance: 20 nF/200 nF/2 μF/200 μF (±4.0%+5) Inductance: 20 mH/200 mH/2 H/20 H (±3.0%+8) 4-digit display Manual range selection Diode testing Continuity testing Non-contact voltage detector (NCV) Transistor gain (hFE): 0~ 1000 Backlit display DATA HOLD mode Impedance: <50 Ohm Size: 188x92x50 mm Battery type: 9 V "Krona"