FLEXICORE LiYY 12x0.34 (m) LAPP 3120002209

FLEXICORE® LiYY – low-frequency control cables with PVC insulation and sheath, with a nominal operating voltage of up to 60 V, maximum peak operating voltage - 350 V for cables with a cross-section of 0.14 mm2, 500 V for cables with a cross-section of 0.25 mm2 and above (not for power circuits). • Cables are designed for control and signal transmission in electronics for computing devices, electronic control and monitoring devices, office equipment, scales, etc. • Designed for use in dry and wet rooms. • Cables are UV resistant according to GOST 20.57.406 clause 2.26. • Cables are resistant to the effects of mineral oil according to GOST 25018. • Cables comply with climatic execution category U 1, 1.1, 2, 2.1, 3, 3.1, 4, 4.1, 4.2 according to GOST 15150. • Cables are designed for stationary installation and for limited mobile application. Construction Based on standards: VDE 0812 and EN 50288-7. • Flexible strands made of fine non-tinned copper wires, class 4 flexibility for cross-sections from 0.14 mm2 to 0.34 mm2, and class 5 flexibility for cross-sections from 0.5 mm2, in accordance with IEC 60228, GOST 22483. • Core insulation made of PVC compound. • Core identification: color in accordance with Table 1, as well as digital upon Customer request (with NC designation on the sheath). • Twisted insulated cores: stranded. • Sheath: UV and oil-resistant PVC compound, color pebble gray RAL 7032; upon Customer request, the sheath can be of another color. Electrical characteristics Strand resistance: 0.14 mm2: max. 138.0 Ohm/km 0.25 mm2: max. 79.0 Ohm/km 0.34 mm2: max. 57.0 Ohm/km 0.5 mm2: max. 39.0 Ohm/km 0.75 mm2: max. 26.0 Ohm/km 1 mm2: max. 19.5 Ohm/km 1.5 mm2: max. 13.3 Ohm/km