Flexible welding cable KGtp-KhL 1x35 (pack 10m) Rexant 01-8413-10

The conductor is copper, round-shaped, multi-wire class 5 according to GOST 22483-2012. Number of cores – 1 with a nominal cross-section of 10.0-50.0 mm2. Sheath made of a composition based on styrene thermoplastic elastomers. In single-core KGtp-XL cables, replacement of the insulation and sheath with an insulation and protective sheath made of thermoplastic elastomer is allowed. Sheath color: black. Application: KG cables are used in power units, mobile lifting mechanisms, lifting and transport equipment, power tools, and other high-power equipment, as well as in welding machines for various types of welding work. Cables are designed for connecting mobile mechanisms to electrical networks at an alternating voltage of 660 V with a frequency of up to 400 Hz or a direct voltage of 1000 V, with bends with a radius of at least 8 cable diameters at an allowable conductor heating temperature of up to 75 °C. Operating temperature range: -60...+50 °C. Cable decoding: K – Cable G – Flexible tp – insulation and sheath made of thermoplastic elastomer XL – cold-resistant version Technical characteristics: Climatic version XL, placement categories 1, 2, 3 according to GOST 15150-69 Nominal alternating voltage: 660 V at a frequency of up to 400 Hz Nominal direct voltage: 1000 V Test alternating voltage: 2.5 kV at a frequency of 50 Hz Dwell time during testing: 5 min Insulation resistance at 20 °C: not less than 50 MOhm•km Construction length: 100...150 m depending on the core cross-section Allowable conductor heating temperature: 75 °C Minimum bending radius: 8 outer diameters Tensile force on the cable must not exceed 19.6 N (2.0 kgf) per 1 mm2 of the total cross-section of all cores Operating temperature range: -60...+50 °C Laying and installation of cables without preheating is carried out at a temperature no lower than -40 °C Service life: at least 3 years (service life is calculated from the date of cable manufacture) Warranty period: 6 months from the date of commissioning, but no later than 12 months from the date of manufacture. Fire hazard class according to NPB 248 O2.7.2.4 OKP Code 35 4000