MS2125A Mastech 13-1323 Clamp Meters

MS2125A clamp meters are high-performance TRUE RMS devices that allow for measuring a wide range of parameters in electrical networks. In addition to the primary function of measuring AC current up to 1000 A, the MS2125A can also measure DC current up to 1000, DC and AC voltage, resistance, frequency, duty cycle, and inrush current. This device features continuity testing and diode testing functions. Notable features include a 40 mm jaw opening, auto and manual range selection, non-contact NCV detector, and work area backlight. MS2125A clamp meters include a DATA HOLD function for measurements taken in hard-to-reach places where viewing the screen is not always possible. The device display is equipped with a backlight, allowing measurements to be performed even in low-light conditions. The device is made of high-quality materials and features an ergonomic design. The device has a reinforced switch to prevent accidental activation. Calibration and testing of the devices are performed under the supervision of the SDS company. Technical specifications: Display 6000 counts Jaw opening radius O 40 mm Auto and manual range selection Automatic shutdown Non-contact voltage detector NCV Relative measurement mode Diode test: 3.2 V Continuity: <50 Ω Max/Min measurement mode Data hold Display backlight Work area backlight TRUE RMS measurements Low battery alert Inrush current measurement Power supply: battery 1 9 V 6F22 Size: 238×92×50 mm Weight: 386 g Characteristics: Range Resolution accuracy DC voltage: 60 mV/600 mV/6 V/60 V/600 V/0.01 mV/0.1 mV/0.001 V/0.01 V/0.1 V ±(0.5% +5) 1000 V 1 V ±(0.8% +4) AC voltage: 60 mV/600 mV/6 V/60 V/600 V/0.01 mV/0.1 mV/0.001 V/0.01 V/0.1 V ±(0.6% +5) 750 V 1 V ±(0.8% +4) DC current: 60 A/600 A/1000 A 0.01 A/0.1 A/1 A ±(2.0% +8) AC current: 60 A/600 A/1000 A 0.01 A/0.1 A/1 A ±(2.0% +8) Inrush current: 60 A/600 A/1000 A 0.01 A/0.1 A/1 A ±(5.0% +60) Resistance: 600 Ω/6 kΩ/60 kΩ/600 kΩ 0.1 Ω/0.001 kΩ/0.01 kΩ/0.1 kΩ ±(0.8% +3) 6 MΩ/60 MΩ 0.001 MΩ/0.01 MΩ ±(2.0% +5) Capacitance: 10 nF/100 nF/1000 nF/10 μF 0.001 nF/0.01 nF/0.1 nF/0.001 μF ±(3.0% +5) 100 μF/1000 μF/10 μF/100 μF 0.01 μF/0.1 μF/0.001 μF/0.01 μF ±(3.0% +5) Frequency (A): 100 Hz/1000 Hz 0.01 Hz/0.1 Hz ±(1.5% +5) Frequency (V): 100 Hz/1000 Hz/10 kHz 0.01 Hz/0.1 Hz/0.001 kHz ±(1.5% +5) Frequency (Hz/Duty): 10 Hz/100 Hz/1000 Hz/10 kHz 0.01 Hz/0.1 Hz/0.001 kHz/0.01 kHz ±(0.3% +5) 100 kHz/1000 kHz/10 MHz 0.1 kHz/0.001 MHz/0.01 MHz ±(0.3% +5) Duty cycle: 0.1~99.9% 0.1% ±(3.0%)