Kit: controller and 3-zone sensor remote SST 12/24V 144/288W IP20 Apeyron 04-50

Set: Controller and 3-zone CCT touch remote control. Purpose: Designed to control CCT 12/24 V LED strips. Up to 3 controllers (art. 04-51) can be connected to 1 remote control and managed individually, creating multiple lighting zones with a unique light and color scene for each room. Control Capabilities: With the controller, you can adjust color shades, turn the LED strip on or off, select various dynamic lighting modes, and adjust brightness. Additionally, the controller allows for adjusting the glow: creating both invigorating cold shades and soothing warm color glows. Compatibility and Power: One of the advantages of this product is the ability to operate at both 12 V and 24 V, meaning it can be used with LED strips of the corresponding voltage. It is important to note that the maximum load power that can be connected to it will differ depending on the voltage the device operates at. Thus, at 12 V, the maximum load will be 144 W, and at 24 V, it will be 288 W. This means you can connect twice as much 24 V LED strip to this product. Communication and Remote Power: The controller is equipped with a remote control that transmits signals via radio channel, allowing the controller itself to be hidden from view while still receiving high-quality signals from the remote and controlling the LED strip. Control is performed using a stylish touch panel located on the front of the remote, which operates on 2 AAA batteries (purchased separately). Housing and Installation: The surface-mounted plastic housing of the controller has a compact size of 85x45x23 mm, allowing the product to be placed in a narrow niche. IP20 Protection Rating: Install the device in a dry, ventilated room. Advantages: - CCT strip control; - 12 V and 24 V LED strip control; - Creation of up to 3 lighting zones with a unique light and color scenario; - Convenient connection of the strip and power supplies using terminal blocks; - Radio channel signal transmission.