Staircase controller 12V/24V 480/960W 32CH 1.5A IP20 199x63x22.5mm 4 modes 10 speeds Apeyron 04-63

Staircase lighting controller 04-63 Purpose: Designed to control monochrome LED strips with a voltage of 12/24 V. Control Capabilities: A single controller can illuminate from 1 to 32 steps. It is used for lighting stairs and various objects where sequential activation of the LED strip is required upon detecting motion within the range of one of the sensors. Sensors respond to motion at a distance of 2 meters at an angle of 180 degrees. Power: Maximum load power 480 W (12 V), 960 W (24 V). Modes: With this device, you can: 1) Adjust the brightness of the connected LED strip; 2) Adjust the speed of the activation intervals between adjacent steps; 3) Adjust the strip turn-off delay; 4) Select the sequential step activation mode. The controller has 4 segment activation modes: one step after another, simultaneous activation of all steps, sequential activation of two steps, compatible activation of steps. Control: Brightness, speed, and mode control is performed on the controller's electronic display. Housing: The product is made of metal and has a size of 199x63x22.5mm. IP20 Protection Rating: Install the device in a dry, ventilated room. An LED strip with a "Running Wave" function can be additionally connected to the controller to illuminate handrails. Advantages: - Sequential step activation; - Ability to illuminate up to 32 steps; - 10 speed programs; - 10 brightness levels; - 4 activation modes; - Last mode memory; - Electronic screen allows viewing the selected mode; - 2 motion sensors included, response range 2 meters at 180 degrees; - Service life over 50,000 hours.