Cover for T-branching vertical adapter 150-300mm with 90deg route turn "PLUS" (bottom part larger than original) HD85 KM PL16099 KM SYSTEM

Cover for a vertical T-junction-adapter with a 90-degree route offset, in which the lower part is larger than the original, used to protect the cable route from external influences and mechanical damage. The model of the 'PLUS' series shaped section of this modification is recommended for use with a T-junction of the corresponding series with a width of 150 mm. The cover is fixed by snapping, and if necessary, it can be removed to gain access to the cable. The product is hot-dip galvanized according to GOST 9.307-2021 and is used for installation in high-humidity and low-pollution indoor environments, outdoors, and in low-corrosive environments, in accordance with GOST 15150-69. The element is part of a system for constructing cable routes of any complexity at industrial, civil, and commercial facilities.