T-shaped branch cover. vertical adapter 300-150mm with 90deg route turn "PLUS" (lower part smaller than original) HD85 KM PL16075 KM SYSTEM

To protect the cable tray from external influences and mechanical damage, a cover for a vertical T-junction adapter with a 90-degree route deviation is used, in which the lower part is smaller than the original. The model of the 'PLUS' series shaped section of this modification is recommended for use with a T-junction of the corresponding series with a width of 300 mm. The product is hot-dip galvanized according to GOST 9.307-2021 and is used for installation in rooms with high humidity and low pollution, outdoors, and in low-corrosive environments, in accordance with GOST 15150-69. The cover is fixed by snapping, and if necessary, it can be removed to gain access to the cable. The product is part of a system for constructing cable trays of any complexity at industrial, civil, and commercial facilities.