Cover for T-junction vertical adapter 400-200mm with 90deg bend "PLUS" (lower part smaller than original) HD85 KM PL16079 SISTEMA KM

To protect the cable route from external influences and mechanical damage, a cover for a vertical T-junction adapter with a 90-degree route turn is used, in which the lower part is smaller than the original. The model of the 'PLUS' series shaped section of this modification is recommended for use with a T-junction adapter of the corresponding series with a width of 400 mm. The product is galvanized by hot-dip method according to GOST 9.307-2021 and is used for installation in rooms with high humidity and low pollution, outdoors, and in low-corrosive environments, in accordance with GOST 15150-69. The cover is fixed by snapping, and if necessary, it can be removed to gain access to the cable. The product is part of a system for constructing cable routes of any complexity at industrial, civil, and commercial facilities.