T-junction cover vertical adapter 500-200mm with 90deg route offset "PLUS" (lower part smaller than original) HD85 KM PL16083 SISTEMA KM

To protect the cable route from external influences and mechanical damage, a cover for a vertical T-junction adapter with a 90-degree route deviation is used, in which the lower part is smaller than the original. The model of the shaped section of the "PLUS" series of this modification is recommended for use with a T-junction of the corresponding series with a width of 500 mm. The product is hot-dip galvanized according to GOST 9.307-2021 and is used for installation in high-humidity and low-pollution indoor environments, outdoors, and in low-corrosive environments, in accordance with GOST 15150-69. The cover is fixed by snapping, and if necessary, it can be removed to gain access to the cable. The product is part of a system for constructing cable routes of any complexity at industrial, civil, and commercial facilities.