T-shaped branch cover. vertical adapter 600-400mm with 90deg track turn "PLUS" (bottom part smaller than original) HD85 KM PL16090 KM SYSTEM

To protect the cable route from external influences and mechanical damage, a cover for a vertical T-junction adapter with a 90-degree route offset, in which the lower part is smaller than the original, is used. A shaped section model of the "PLUS" series of this modification is recommended for use with a T-junction of the corresponding series with a width of 600 mm. The product is galvanized by hot-dip method according to GOST 9.307-2021 and is used for installation in premises with high humidity and low pollution, outdoors, and in low-corrosive environments, in accordance with GOST 15150-69. The cover is fixed by snapping, and if necessary, it can be removed to gain access to the cable. The product is part of a system for constructing cable routes of any complexity at industrial, civil, and commercial facilities.