Cover for T-branching splitter. vertical adapter with 90deg track turn 150-100 steel 1mm "PLUS" (bottom part smaller than original) KTDPSplus90-150-100 HD KM PL4217 KM SYSTEM

To protect the cable route from external influences and mechanical damage, a cover for a vertical T-junction adapter with a 90-degree route deviation is used, in which the lower part is smaller than the original. The model of the "PLUS" series shaped section of this modification is recommended for use with a T-junction of the corresponding series with a width of 150 mm. The product is hot-dip galvanized according to GOST 9.307-2021 and is used for installation in rooms with high humidity and low pollution, outdoors, and in low-corrosive environments, in accordance with GOST 15150-69. The cover is fixed by snapping, and if necessary, it can be removed to access the cable. The product is part of a system for constructing cable routes of any complexity at industrial, civil, and commercial facilities.