LED strip 24V 8W/m smd2835 60diodes/m IP20 700lm/m warm white 3000K (pack 5m) Apeyron 00-349

The LED strip from the Standard S-type line with article number 00-349 operates on 24 V DC. Thanks to the smd 2835 LEDs, emitting a luminous flux of 700 Lm/m, the strip is an excellent solution for decorative lighting. Thanks to the specially designed substrate configuration, the LED strip is ideal for installation in places with many bends in different planes and can be used for lighting niches in walls, multi-level ceilings, furniture, and even very complex geometric shapes, including letters. Now decorative lighting can be achieved even in places where it previously seemed very difficult or practically impossible due to the fact that a standard LED strip substrate only bends in one plane. In addition, it is worth noting that the LEDs use modernized crystals, making this strip 43% better in brightness and energy efficiency compared to other LED strips with the same power consumption. Compared to incandescent lamps, the LED strip is equivalent to 70 W lamps. This LED strip model has a warm white light color with a color temperature of 3000 K. When choosing an LED strip, it is important to consider the power consumption to correctly select the power supply unit. For this model, this indicator is 8 W per meter. The IP20 protection rating of this product implies use only in dry and ventilated rooms. The LED strip can be cut at specially marked points located every 100 mm. The compact dimensions of the LED strip, with a width of 6 mm and a base made of flexible, double-layered, S-shaped copper substrate, further expand the possibilities for realizing any designer's fantasy. To control the strip, use a dimmer for monochrome LED strips (sold separately). With it, you can turn the LED strip on or off, adjust its brightness, as well as use various dynamic modes and adjust their speed. Advantages: - High-quality modern San’an LEDs with increased brightness; - Lower current – up to 2 times more strip can be connected to the controller; - Connectors and wires for connection are already soldered onto the LED strip; - Improved cooling thanks to the double-layered copper substrate; - Ability to connect at a distance from the power source; - Ability to connect up to 10 meters of strip in series; - Energy saving compared to traditional light sources; - Ease of installation thanks to high-quality 3M tape; - Comfortable color rendering due to CRI > 80; - Service life increased up to 60,000 hours; - Warranty — 3 years.