Heat shrink tubing TL-0.8 50x0.8mm with adhesive layer black 5m Rexant 48-9016

Heat-shrinkable adhesive tape is used for insulating electrical busbar connection points and repairing cable insulation damage. The product is recommended for use in locations where strong and airtight connections of structural elements are required. REXANT heat-shrinkable tape is resistant to tracking, ultraviolet radiation, and weather conditions. Installation is carried out in an overlap of 2/3 of the tape and is accompanied by simultaneous heating using high-temperature heat guns or gas torches. The inner side of the tape has an adhesive layer that melts during shrinkage and ensures the airtightness of the insulating circuit. Good adhesion of the thermoplastic adhesive to metal, wood, ceramics, and plastics allows the use of tapes in connections of ventilation and through pipes, power wires, and communication cables. The heat-shrinkable tape is flame retardant. Elongation at break: at least 400%; Shrinkage temperature: from +120°; Tensile strength: at least 15 MPa; Dielectric strength: at least 15 kV/mm; Operating voltage: up to 10 kV; Specific electrical resistance: 10^14 Ohm/cm; Shrinkage ratio: 1.4:1; Tape thickness after shrinkage: 0.8 mm; Warranty service life - 7 years. Storage warranty period - 7 years.