Tray 200x50 L 3000 thickness 1.2 mm, hot-dip galvanized 3502412HDZ DKC

DKS non-perforated sheet trays are used for cable installation both indoors and outdoors. The trays feature high load-bearing capacity – the forming process used during production creates an additional stiffening rib, which increases the system's load-bearing capacity by up to 54%. When using a cover and seals, an IP 44 degree of dust and water protection can be achieved. The "male-female" connection method used for the system significantly reduces installation time and creates a continuous grounding loop. The design of DKS sheet trays prevents cable damage during installation. Steel thickness – 1.2 mm, tray height – 50 mm, width – 200 mm, length – 3000 mm. Trays in the special "Hot Zinc" version have increased corrosion resistance – they are protected from rust for 30-50 years (depending on the operating conditions of the cable route).