Straight tray H=100mm steel 1.2mm NL60-P1.87 tsUT2.5 SOEMI N0112116371 SOEMI St.Oskol

Ladder-type trays consist of two flanges (stringers, troughs) which are connected by crossbars (strips). As a result, a structure similar to a ladder is obtained, from which they get their name. As a rule, the design of ladder trays, due to a larger number of reinforcing ribs, provides a higher load capacity compared to sheet trays at approximately equal weight and dimensions. Ladder trays are intended for open installation of cables and cable lines in residential buildings, office centers, shopping complexes and various types of industrial facilities. The design of ladder trays ensures high load capacity with low self-weight. Splicing of trays is carried out via a "male-female" telescopic connection with a length of 130 mm. When using connectors, trays can also be spliced "butt-to-butt". For connection, M8 threaded fasteners are used. If a change in direction or branching of the route is required, fittings and various accessories are used. Ladder cable trays can be laid in both horizontal and vertical directions. If a vertical ladder tray is used, such a structure is called a cable riser. During installation, the cable riser is often fixed to building or technological structures. In addition, the design of cable risers allows for reliable fixation of cables (wires) laid in them. This is ensured by their fastening using clamping clips and other elements. This ladder tray is made of steel galvanized by the Sendzimir method. It has the following overall characteristics: metal thickness 1.2 mm, length – 1870 mm, height – 100 mm. Corresponds to the climatic execution: UT2.5. High standard of product quality, flexible production, ensuring delivery of any volume strictly on time! Straight tray NL60-P1.87ts UT2.5 (h=100 mm, s=1.2 mm) is manufactured according to TU 3449-017-05774835-2007.