Straight tray H=100mm steel 1.5mm NL60-P1.87 tsUT2.5 SOEMI N0112116471 SOEMI St.Oskol

Ladder-type trays consist of two sides (stringers, troughs) connected by crossbars (strips). This results in a structure similar to a ladder, which is where their name originates. As a rule, due to a larger number of reinforcing ribs, the design of ladder trays provides a higher load capacity compared to sheet trays at approximately equal weight and dimensions. Ladder trays are designed for the open installation of cables and cable lines in residential buildings, office centers, shopping complexes, and various types of industrial facilities. The design of ladder trays ensures high load capacity with low self-weight. Tray splicing is carried out via a 130 mm "male-female" telescopic connection. When using connectors, trays can also be spliced "butt-to-butt". M8 threaded fasteners are used for connection. If a change in direction or branching of the route is required, fittings and various accessories are used. Cable ladder trays can be laid in both horizontal and vertical directions. If a vertical ladder tray is used, such a structure is called a cable riser. During installation, the cable riser is often attached to structural or technological structures. In addition, the design of cable risers allows for reliable fixation of the cables (wires) laid in them. This is ensured by fastening them with clamping clips and other elements. This ladder tray is made of steel galvanized by the Sendzimir method. It has the following dimensions: metal thickness 1.5 mm, length – 1870 mm, height – 100 mm. Corresponds to climatic execution: UT2.5. High product quality standard, flexible production, ensuring on-time delivery of any volume! Straight tray NL60-P1.87ts UT2.5 (h=100 mm, s=1.5 mm) is manufactured according to TU 3449-017-05774835-2007.