Straight Tray H=50mm steel 1.2mm NL20-P2.87 tsUT2.5 SOEMI N0112113332 SOEMI St.Oskol

Ladder-type trays consist of two side rails (stringers, gutters) connected by crossbars (strips). This results in a structure similar to a ladder, from which they derive their name. As a rule, due to a greater number of stiffeners, the design of ladder trays provides a higher load capacity compared to sheet trays at approximately equal weights and sizes. Ladder trays are designed for open installation of cables and cable lines in residential buildings, office centers, shopping complexes, and various types of industrial facilities. The design of ladder trays ensures high load capacity with low self-weight. Tray splicing is carried out via a 130 mm "male-female" telescopic connection. When using connectors, trays can also be spliced "butt-to-butt". M8 threaded fasteners are used for connection. If a change in direction or branching of the route is required, shaped elements and various accessories are used. Ladder cable trays can be laid in both horizontal and vertical directions. If a vertical ladder tray is used, such a structure is called a cable riser. During installation, the cable riser is often attached to structural or technological structures. In addition, the design of cable risers allows for reliable fixation of the cables (wires) laid in them. This is ensured by fastening them with clamping clips and other elements. This ladder tray is made of steel galvanized by the Sendzimir method. It has the following dimensions: metal thickness 1.2 mm, length – 3000 mm, height – 50 mm. Corresponds to the climatic version: UT2.5. High product quality standard, flexible production, ensuring on-time delivery of any volume! Straight tray NL20-P2.87ts UT2.5 (h=50 mm, s=1.2 mm) is manufactured according to TU 3449-017-05774835-2007.