Straight tray H=70mm steel 1.5mm NL50-P2.87 tsUT2.5 SOEMI N0112115462 SOEMI St.Oskol

Ladder-type trays consist of two side rails (stringers, troughs) connected by crossbars (strips). As a result, a structure similar to a ladder is formed, from which they get their name. As a rule, due to a larger number of stiffeners, the design of ladder trays provides a higher load capacity compared to sheet trays at approximately equal weight and dimensions. Ladder trays are designed for open installation of cables and cable lines in residential buildings, office centers, shopping complexes, and various types of industrial facilities. The design of ladder trays ensures high load capacity with low self-weight. Trays are joined via a 130 mm telescopic "male-female" connection. When using connectors, trays can also be joined "butt-to-butt". M8 threaded fasteners are used for connection. If a change in direction or route branching is required, shaped elements and various accessories are used. Ladder cable trays can be laid in both horizontal and vertical directions. If a ladder tray is used vertically, such a structure is called a cable riser. During installation, the cable riser is often attached to building or technological structures. In addition, the design of cable risers allows for reliable fixation of the cables (wires) laid in them. This is ensured by fastening them with clamping clips and other elements. This ladder tray is made of steel galvanized by the Sendzimir method. It has the following dimensions: metal thickness 1.5 mm, length – 2870 mm, height – 70 mm. Corresponds to climatic execution: UT2,5. High product quality standard, flexible production, ensuring on-time delivery of any volume! Straight tray NL50-P2,87ts UT2,5 (h=70 mm, s=1.5 mm) is manufactured according to TU 3449-017-05774835-2007.