Agricultural machine MK-13000P HUTER 70/5/18

FUEL TANK VOLUME, L - 6 ENGINE TYPE - Gasoline 4-stroke single-cylinder REDUCER - Gear, Cast iron CLUTCH - Disc in oil bath SPEEDS - 2 forward / 1 reverse WORKING WIDTH, CM - 1400 FROUTER DIAMETER, CM - 32 NOMINAL ENGINE POWER, HP - 13 HUB - Hexagon 32 cm. STARTER TYPE - Manual The HUTER MK-13000 agricultural machine is used for soil cultivation, i.e., loosening the soil without turning it over, leveling, and other operations. The unit provides good results on private and farm plots, garden areas, limited territories, between rows, in flower beds, and near trees. MK-13000 is an analog of MK-11000, with a more powerful 13 hp engine. Device - Engine. HUTER agricultural machines use gasoline internal combustion engines. Cultivator engines are equipped with automatic speed regulators that simplify the operator's work. The nominal power range of our cultivator line allows you to choose the right one for any type of work. - Clutch and reducer ensure the transmission of torque from the engine to the working shaft. - Aggregation system is designed to couple the machine with attachments installed on the working axis or frame. - Control system. Since the operator walks behind the agricultural machine during earthworks, all control elements must be operated only by the operator's hands. Technical characteristics - Power – determines the productivity of the cultivator. The more powerful the engine installed on the cultivator, the harder the soil and the greater the depth it can process. - Speeds – allow you to choose the appropriate range for higher quality soil cultivation, and also facilitate extracting the unit from the ground after work using the reverse gear. - Working width – depends on the installed blades, can reach up to 85 cm with standard blades and up to 120 cm with additional ones. The greater the working width, the more efficient the cultivator's work. However, it may be necessary to plow narrow strips of land, for which the blades have a composite design, i.e., there is an opportunity to process strips 30 and 50 cm wide. - Working depth – depends on the engine power and the installed blades. The greater the working depth, the more qualitatively and effectively the soil will be plowed. - Fuel tank volume – determines the continuous operating time of the cultivator without refueling. Features - Ability to adjust soil cultivation depth and width. - Low oil level protection. If the oil level is below the permissible level, Huter agricultural machines and motor cultivators will not start or will stall if this happens during operation. - Ability to choose speed (for heavy and medium cultivators) and two operating speeds "forward and backward" for the entire line of cultivators. - A wheel in the front part of the agricultural machine for ease of movement, or a parking support (skid) in the rear for ease of storage. - The possibility of easy disassembly of the cultivator ensures convenience during transportation and storage.