Address tag AM-1-R3 Rubezh Rbz-337436

The addressable tag monitors the resistance of its loop and transmits a notification of the corresponding event to the control panel – the closing-opening of the contacts of the monitored device connected to the loop, or a loop fault, specifying its address. The addressable tag loop in the system can have one of the following types: Fire; Security; Technological; Fault. The selection of the loop type, as well as the type of connected contacts of the monitored device (normally closed or normally open), is performed during the initial configuration of the tag. It is possible to adjust the default "normal" and "alarm" thresholds. One or two sensors with a "dry contact" output can be connected to the addressable tag loop. A shunt resistor must be connected in parallel to each contact. In the system, the addressable tag occupies one address. Powering the addressable tag and transmitting signals to the control panel are carried out via the addressable communication line.