Motor cultivator GMC-6.8 HUTER 70/5/21

The HUTER GMC-6.8 power cultivator is used for soil cultivation, which means loosening the soil without turning it over, leveling, and other operations. The unit delivers good results on private and farm holdings, garden plots, in limited areas, between rows, on flower beds, and near trees. The power cultivator is equipped with a four-stroke internal combustion engine. GMC-6.8 is a cultivator in a compact body with powerful milling cutters. GMC-7.0 is the updated, most powerful model in the cultivator lineup. It is now equipped with powerful milling cutters and removable rear wheels for rolling. Both models have characteristics close to power tillers. Power Cultivator Components - Engine. HUTER power cultivators use gasoline internal combustion engines. Cultivator engines are equipped with automatic speed regulators that simplify the operator's work. The nominal power range of our cultivator lineup allows for choosing a suitable model for any type of work. - Clutch and gearbox ensure the transmission of torque from the engine to the working shaft. - Aggregation system is designed to couple the power cultivator with attachments installed on the working axis or frame. - Control system. Since the operator walks behind the power cultivator during earthworks, all controls must be operated only by the operator's hands. Technical Specifications - Power – determines the cultivator's productivity. The more powerful the engine installed on the cultivator, the harder the soil and the greater the depth it can process. - Speeds – allow choosing a suitable range for higher quality soil processing, and also facilitate extracting the unit from the ground after work is finished via reverse gear. - Working width – depends on the installed blades; it can reach up to 85 cm with standard blades and up to 120 cm with additional ones. The greater the working width, the more efficient the cultivator's work. However, it may be necessary to plow narrow strips of land, for which the blades have a composite design, i.e., there is an option to process strips with a width of 30 and 50 cm. - Working depth – depends on the engine power and the installed blades. The greater the working depth, the more qualitatively and effectively the soil will be plowed. - Fuel tank capacity – determines the continuous operating time of the cultivator without refueling. HUTER Cultivator Features - Ability to adjust soil processing depth and width. - Low oil level protection. If the oil level is below the permissible limit, Huter agricultural machines and power cultivators will not start or will stall if this happens during operation. - Ability to choose speed (for heavy and medium cultivators) and two operating speeds "forward and backward" for the entire cultivator lineup. - A wheel in the front part of the power cultivator for ease of movement or a parking support (skid) in the rear for ease of storage. - The ability for easy disassembly of the cultivator ensures convenience during transportation and storage. FUEL TYPE - AI-92 Gasoline FUEL TANK CAPACITY, L - 3.6 ENGINE TYPE - Gasoline 4-stroke single-cylinder SPEEDS - 1 Forward/ 1 Backward WORKING WIDTH, CM - 90 MILLING CUTTER DIAMETER, CM - 30 NOMINAL ENGINE POWER, HP - 6.8