Cable end sleeve 1PKVT-10-500/630 ng-LS 76425 KVT

• Designed for terminating single-core cables: • with cross-linked polyethylene insulation and copper wire screen • for voltages of 6 and 10 kV • Complies with GOST 34839-2022 requirements • Included in the Ministry of Industry and Trade register • Cable types for installation: (A)PvP, (A)PvV, (A)PvPu, (A)PvPg, (A)PvPug, (A)PvP2g, (A)PvPu2g • The presence of an electric field stress relief tube ensures the reliability of high-voltage joints by uniformly distributing the electric field stress in the area of the semiconductor screen cut • Anti-tracking tube material is resistant to tracking, UV radiation, and weather conditions • Thermoplastic adhesive applied to the inner surface of the anti-tracking tube and the winding of sealing tape at the wire screen exit ensure complete sealing of the joint after installation • The grounding wire is formed directly from the copper wire screen of the cable and is terminated with a crimp sleeve • When installing the grounding unit on a cable with armor made of steel or aluminum wires, it is necessary to additionally use a "KMPB Grounding Kit" corresponding to the selected joint. • The joint kit is universal and allows the use of both crimp cable terminals and bolt terminals • The delivery set is designed for the installation of a three-phase cable • Note: 1PKVT-10-800(B) joints are designed for installation only on cables with aluminum conductors • Installation tools: PG (KVT) propane torch, NMB-6 (KVT) bolt head and connector removal kit, insulation and semiconductor screen removal tools • Manufactured according to TU 3599-005-97284872-2015 * Prices are per 1 joint (shipment is carried out in multiples of 3 joints)