Universal Multimeter MS8233E Mastech 13-2013

Multimeter is an electrical measuring instrument that includes several functions and a set of measurable parameters. All MS8233 series devices measure DC and AC voltage, as well as DC and AC current, circuit resistance, and even temperature. With this device, you can perform diode testing and circuit continuity testing. The MS8233E multimeter is equipped with a special sensor that allows you to non-contactly determine if there is voltage in a section, for example, in a socket; if there is a need to dismantle it, you can immediately find out if there is voltage in it using this multimeter. Thus, one device can replace several devices at once. The MS8233E device is a portable multimeter; its compact size allows you to always carry it with you. But, despite its small size, this multimeter has wide functionality, which distinguishes it from others. The device has a DATA HOLD function for cases when measurements are performed in hard-to-reach places and there is not always an opportunity to look at the screen. The device display is equipped with a backlight, which allows performing measurements even in low-light areas. The device has a max value display mode, which will allow reducing the time for studying data. Engineers tried to make the device as convenient as possible for use. MS8233E has an automatic range selection function. Unlike outdated models where you had to manually set the ranges, now you only need to select which parameter you are going to measure. In addition, the device has an enhanced switch, which eliminates the possibility of accidental pressing. Calibration and testing of the devices were carried out under the control of the SDS company. Specifications: DC voltage: 200 mV/2 V/20 mV/200 V (±0.5%+3), 600 V (±0.8%+2) AC voltage: 2 V/20 V/200 V (±0.9%+3), 600 V (±1.2%+3) DC current: 200 μA/2 mA/20 mA/200 mA (±1.0%+3), 10 A (±1.5%+4) AC current: 200 μA/2 mA/20 mA/200 mA (±1.5%+3), 10 A (±1.5%+4) Resistance: 200 Ohm/2 kOhm/20 kOhm/200 kOhm (±0.8%+2), 2 MOhm/20 MOhm (±1.0%+2) Temperature: –20~+1000 °C (±3.0%+3) 4-digit display Automatic and manual range selection Diode testing Continuity testing <70 Ohm Backlit display Non-contact voltage detector NCV DATA HOLD mode Max Hold mode Size: 145x73x45 mm Battery type: 9 V "Krona"