Heat shrink tubing set TTU ng-LS 2:1 No.5 (5 colors 10pcs each 100mm) Era B0067665

General industrial heat-shrinkable tubes TTU ng-LS in retail sets are a universal solution for insulation and marking. The tubes are manufactured by extrusion from a special polyolefin compound with the addition of flame retardants, then cut into 10 cm segments. A 2:1 heat-shrink ratio ensures reliable fixation and protection, while a wide color range and variety of diameters allow for selecting the optimal option for various tasks. Suitable for domestic use. The sets include tubes of the following colors: black, white, red, green, yellow, blue; 10 pieces of 100 mm: 3/1.5 – 1 piece of each color (black, white, red, blue); 4/2 – 1 piece of each color (red, blue); 5/2.5 – 1 piece of each color (green, yellow); 6/3 – 1 piece of each color (black, red). Applications: - restoration of insulation and sheath damage in cables and wires; - sealing of surfaces and electrical connections of cables and wires; - binding and marking of wires; - creation of anti-corrosive protective and decorative coatings. It is recommended to use installation tools - construction heat guns, propane or butane torches. Product parameters: - Material: polyolefin, non-flammable - Rated voltage Ue: 690 V - Shrinkage temperature: +80° / +110 °C - Operating temperature: -55° / +115 °C - Relative elongation at break: min 300 % - Tensile strength: not less than 15 MPa - Dielectric strength: not less than 15 kV/mm - Specific volume electrical resistance: 10^14 Ohm·cm - Halogen free "HF - halogen free"