Sealed Insulated Cable Lugs NIM 95 (CPTAU 95) IEK UZA-25-D95

Designed for hermetic termination of multi-strand wires by crimping. The insulation material is a polymer resistant to ultraviolet radiation and weather conditions. The product design ensures hermeticity at 6 kV frequency 50 Hz for 1 minute at a depth of 1 meter. To achieve these parameters, the corresponding layer of wire insulation must be removed. The stripping length is indicated on the terminal. The stripping edge must be even, and the wire insulation thickness must remain at the same level up to the stripping edge. The wire must be inserted into the product until it stops. Crimping must be performed from the center to the edge, observing the crimping limit and the number of crimps specified on the product. For load-bearing wires, the allowable mechanical loads on the crimped connection are: - 1200 N for cross-sections 16 mm2 and 25 mm2. - 2500 N for cross-sections 35 mm2, 50 mm2, 54 mm2, 70 mm2, 95 mm2, 120 mm2, 150 mm2.