T-shaped duct bend. ladder 100x100x1.5mm HD N KM LO39268 KM SYSTEM

The T-junction ladder allows for maintaining specified bending radii of the cable route during installation. This product modification is used for branching off from the cable route at a 90-degree angle. It is recommended to use the element with a metal cable ladder 100 mm wide and 100 mm high. The product is hot-dip galvanized according to GOST 9.307-2021 and is used for installation in high-humidity and low-pollution indoor environments, outdoors, and in low-corrosive environments, in accordance with GOST 15150-69. The T-junction is easily installed using connection plates and fasteners.