T-shaped bend for tray, ladder 150x50 steel 1.5mm "BYSTRY MONTAGE" LTDS50-150-1.5 HD KM LO19195 KM SYSTEM

"Quick Installation" T-shaped ladder bend allows maintaining specified bending radii of the cable route during installation. This product modification is used for branching off the cable route at a 90-degree angle. The element is recommended for use with a metal ladder tray 150 mm wide. The product is hot-dip galvanized according to GOST 9.307-2021 and is used for installation in high-humidity and low-pollution indoor environments, outdoors, and in low-corrosive environments, in accordance with GOST 15150-69. The T-bend is easily installed using fasteners. Special connection tabs on the section body ensure the necessary rigidity of the butt joint and the integrity of the route.