T-shaped ladder tray bend 80x300x1.5mm HD N KM LO39263 KM SYSTEM

The T-junction ladder allows for maintaining the specified bending radii of the cable route during installation. This product modification is used for branching off the cable route at a 90-degree angle. The element is recommended for use with a metal ladder tray with a width of 300 mm and a side height of 80 mm. The product is galvanized by hot-dip method according to GOST 9.307-2021 and is used for installation in high-humidity and low-pollution indoor environments, outdoors, and in low-corrosive environments, in accordance with GOST 15150-69. The T-junction is easily installed using connection plates and fasteners.