T-shaped bend for tray, ladder 80x400x1.2mm "Fast installation" HD85 KM LO58515 KM SYSTEM

The "Quick Installation" ladder T-junction allows maintaining the specified bending radii of the cable route during installation. This product modification is used for branching off the cable route at a 90-degree angle. It is recommended to use the element with a metal ladder tray 400 mm wide. The product is hot-dip galvanized according to GOST 9.307-2021 and is used for installation in rooms with high humidity and low pollution, outdoors, and in low-corrosive environments, in accordance with GOST 15150-69. The T-junction is easily installed using fasteners. Special connecting tabs on the section body ensure the necessary rigidity of the butt joint and the integrity of the route.