T-shaped bend for tray, ladder 80x500x1.5mm "Fast installation" HD85 KM LO58518 KM SYSTEM

"Quick Installation" ladder T-junction allows maintaining the specified bend radii of the cable route during installation. The product modification is used for branching off the cable route at a 90-degree angle. The element is recommended for use with a 500 mm wide metal ladder tray. The product is hot-dip galvanized according to GOST 9.307-2021 and is used for installation in high-humidity, low-pollution indoor environments, outdoors, and in low-corrosive environments, in accordance with GOST 15150-69. The T-junction is easily installed using fasteners. Special connecting tabs on the section body ensure the necessary rigidity of the joint and the integrity of the route.