T-shaped vertical downward tray bend with 90deg route turn 150x100 steel 1mm "PLUS" TDVplus90-100-150 HD KM PL2221 SISTEMA KM

Vertical downward T-junction "PLUS" series allows maintaining the specified bending radii of the cable route during installation. The product modification is used to divert the route downwards, while rotating the open part of the metal tray around its axis by 90 degrees. The element is recommended for use with a metal sheet tray of the same series with a width of 150 mm and a side height of 100 mm. The product is hot-dip galvanized according to GOST 9.307-2021 and is used for installation in high-humidity and low-pollution indoor environments, outdoors, and in low-corrosive environments, in accordance with GOST 15150-69. The T-junction is easy to install using fasteners. Special connecting tabs on the section body provide the necessary rigidity of the butt joint structure.