T-shaped tray bend. vertical down with 90deg route turn 500x50 steel 1mm "PLUS" TDVplus90-50-500 HD KM PL3635 KM SYSTEM

The "PLUS" series vertical downward T-junction allows maintaining the specified bend radii of the cable route during installation. The product modification is used to divert the route downwards, while rotating the open part of the metal tray around its axis by 90 degrees. It is recommended to use the element with a metal sheet tray of the same series with a width of 500 mm and a side height of 50 mm. The product is galvanized by hot-dip according to GOST 9.307-2021 and is used for installation in rooms with high humidity and low pollution, outdoors, and in low-corrosive environments, in accordance with GOST 15150-69. The T-junction is easily mounted using fasteners. Special connecting tabs on the section body provide the necessary rigidity of the butt joint structure.