T-junction for cable tray vertical up with 90deg turn 100x80 steel 1mm "PLUS" TDNplus90-80-100 HD KM PL3696 KM SYSTEM

A "PLUS" series vertical upward T-tee is used to ensure the specified bending radii of the cable route during installation. The element's design is applicable for branching the route upwards, while rotating the open part of the metal tray around its axis by 90 degrees. It is recommended to use the element with a metal sheet tray of the same series, 100 mm wide and 80 mm high. The product is galvanized by hot-dip method according to GOST 9.307-2021 and is used for installation in high-humidity and low-pollution indoor environments, outdoors, and in mildly corrosive environments, in accordance with GOST 15150-69. The T-tee is easily mounted using fasteners. Special connecting tabs on the section body provide the necessary structural rigidity of the joint and the integrity of the route.