T-shaped tray bend vertical up with 90deg route turn 500x80 steel 1mm "PLUS" TDNplus90-80-500 HD KM PL3700 KM SYSTEM

To ensure the specified bending radii of the cable route during installation, a "PLUS" series vertical upward T-elbow is used. The element design is applicable for diverting the route upwards, while rotating the open part of the metal tray around its axis by 90 degrees. It is recommended to use the element with a sheet metal tray of the same series with a width of 500 mm and a side height of 80 mm. The product is galvanized by the hot-dip method according to GOST 9.307-2021 and is used for installation in high-humidity and low-pollution rooms, outdoors, and in mildly corrosive environments, in accordance with GOST 15150-69. The T-elbow is easily installed using fasteners. Special connecting tabs on the section body provide the necessary rigidity of the joint structure and the integrity of the route.