T-shaped vertical upward bend for tray 90deg route turn 600x100 steel 1mm "PLUS" TDNplus90-100-600 HD KM PL3707 KM SYSTEM

To ensure the specified bending radii of the cable route during installation, a vertical upward T-junction of the "PLUS" series is used. The design of the element is applicable for routing the route upwards, while rotating the open part of the metal tray around its axis by 90 degrees. It is recommended to use the element with a metal sheet tray of the same series with a width of 600 mm and a side height of 100 mm. The product is galvanized by hot-dip method according to GOST 9.307-2021 and is used for installation in rooms with high humidity and low pollution, outdoors, and in low-corrosive environments, in accordance with GOST 15150-69. The T-junction is easily mounted using fasteners. Special connecting tabs on the section body ensure the necessary rigidity of the joint assembly and the integrity of the route.