Floor hatch ONFLOOR 12 12mod. PRIMER IEK KNL-57-12-7012

ONFLOOR 12 floor box. Designed for organizing workstations in office or administrative premises. The box can accommodate 12 modules (6 posts 45x45 mm / 12 modules 45x22.5). Installation is carried out in two frames with 6 modules each. It is possible to install the box in a raised floor with a thickness from 10 to 40 mm, requiring a mounting hole of 218x288 mm, or in a concrete floor with the mandatory use of a floor box, depending on the thickness of the concrete layer: 57-75 mm: KNU-12-PA-9011; 80-95 mm: KNU-80-16-PA-9011 (the box frame is attached to the floor box using 3.9x13 mm diameter screws, which are supplied in the kit). The box cover has a slight indentation reinforced with a steel sheet for installing floor covering with a maximum thickness of 7 mm (recommended floor coverings are carpet or laminate). The cover contains 2 flip-out outlets with soft material that allow for cable exit from the box. IP30 protection rating - the box is not intended for wet cleaning. The box design is rated for a maximum load of 1500N. Package contents: ONFLOOR 12 floor box - 1 pc., 6-module frame for vertical installation - 2 pcs., stencil for finish coating - 1 pc., fastener kit - 1 set. Boxes for installing the box in a concrete floor are purchased separately. Color: dark gray RAL 7012.