Air damper actuator 10Nm 2-pos 2xSPDT/~250V?3(1.5)A ~230V with spring return SE DASR10SEL Systeme Electric

Damper actuator with spring return, for controlling the position of rotary air dampers in building ventilation and air conditioning systems, torque 10 Nm, damper area 2 m2, full stroke time during motor operation 100 s, spring return time 25 s, rotation angle up to 95° set by an adjustable mechanical limiter, 2-position control signal (ON/OFF), power supply 230 V (85 to 265 V) AC, power consumption 5 VA when opening the damper and 3 VA when holding the damper in the open position, two limit switches with a changeover contact switching up to 250 V AC up to 3 A for resistive load or up to 1.5 A for inductive load, round damper shaft with diameter from 10 to 21 mm or square shaft from 6 to 15 mm and length of at least 90 mm, cable connection with 1 m cable length and wire cross-section 0.5 mm2, manual control using the included hex key, ambient temperature from -30 to +50 °C, enclosure protection rating IP54