2-speed control unit with emergency button and key EMAS PV9EA30B4444

PV9EA30B4444 Control Pushbutton 9 buttons (first button "emergency stop" CP200EA30, with key, 1NC), two-speed, PV series (250V AC, 4A), IP65 TECHNICAL INFORMATION Contact group (1NO+1NC)x8 and 1NC Contact current (ie) 4A (250V AC) Utilization category AC15 Mechanical service life (minimum number) 1000000 Electrical service life (minimum number) 100000 Insulation voltage (Ui) 300V Impulse withstand voltage (Uimp) 2.5kV Dielectric strength (contact with body) 2,500V AC Dielectric strength (contact-contact) 1,500V AC Insulation resistance 10 MOhm (500V DC) Operating temperature -15 /+ 80°C Pollution degree 3 Protection class IP65 Contact material AgNi Cable connection cross-section 1.5-2.5mm2 Tightening torque 1.5Nm Short-circuit breaking capacity (Ics) 1kA PV series Number of speeds 1 EMAS PV series control pushbuttons are designed for controlling cranes, jib cranes, electric chain hoists, electric wire rope hoists, overhead cranes and gantry cranes. The PV series pushbutton can also have several versions: two, three, four, five, six, seven, eight, nine, ten, eleven and twelve button, and include emergency stop, emergency signal, signal, key mark, on/off power button (switch), light filter, motor speed up or down keys, two or four position joysticks. EMAS control pushbuttons are made of high-quality glass fiber reinforced plastic, Advantages of control pushbuttons: • Designed for d22mm buttons • Cable outlet seal • Easy installation • Housing reinforced with acrylonitrile butadiene styrene copolymer • Mechanical protection against simultaneous operation in the opposite direction • Aesthetic design and convenient housing