EMAS PV5AC20A22 Control unit

5-button control panel (first button key-mark CP100AC20, 1NO), single-speed, PV series (250V AC, 4A), IP65 TECHNICAL INFORMATION Contact group 1NO Contact current (t.e.) 4A (250V AC) Utilization category AC15 Mechanical service life (minimum number) 1,000,000 Electrical service life (minimum number) 100,000 Insulation voltage (Ui) 300V Rated impulse voltage (Uimp) 2.5kV Dielectric strength (contact-to-body) 2,500V AC Dielectric strength (contact-to-contact) 1,500V AC Insulation resistance 10 MOhm (500V DC) Operating temperature -15 / +80°C Pollution degree 3 Protection class IP65 Contact material AgNi Cable connection cross-section 1.5-2.5mm2 Tightening torque 1.5Nm Short-circuit breaking capacity (Ics) 1kA PV series Number of speeds 1 EMAS PV series control panels are intended for controlling cranes, jib cranes, electric hoists, chain and wire rope hoists, overhead and gantry cranes. The PV series control panel can also have several versions: two, three, four, five, six, seven, eight, nine, ten, eleven, and twelve-button, and include emergency stop, emergency signal, signal, key-mark, on/off power button (switch), light filter, motor speed up or down keys, and two or four-position joysticks. EMAS control panels are made of high-quality glass-fiber reinforced plastic, Advantages of control panels: • Designed for d22mm buttons • Cable outlet seal • Easy installation • Housing reinforced with acrylonitrile butadiene styrene copolymer • Mechanical protection against simultaneous operation in opposite directions • Aesthetic design and convenient housing