Control panel EMAS PV7E30B222

PV7E30B222 Control pendant 7 buttons (first button "emergency stop" CP200E30, 1NO, 1NC), single-speed, PV series (250V AC, 4A), IP65 TECHNICAL INFORMATION Contact group (1NO+1NC)x6 and 1NC Rated current (i.e.) 4A (250V AC) Utilization category AC15 Mechanical life (minimum) 1000000 Electrical life (minimum) 100000 Insulation voltage (Ui) 300V Impulse withstand voltage (Uimp) 2.5kV Dielectric strength (contact-to-body) 2,500V AC Dielectric strength (contact-to-contact) 1,500V AC Insulation resistance 10 MOhm (500V DC) Operating temperature -15 /+80°C Pollution degree 3 Protection class IP65 Contact material AgNi Cable connection cross-section 1.5-2.5 mm2 Clamping force 1.5 Nm Short-circuit breaking capacity (Ics) 1kA PV series Number of speeds 1 EMAS PV series control pendants are designed for controlling cranes, jib cranes, electric hoists, chain and wire rope hoists, overhead and gantry cranes. The PV series pendant can also have several design options: two, three, four, five, six, seven, eight, nine, ten, eleven, and twelve button versions, and may include emergency stop, emergency signal, signal, key mark, power on/off button (switch), light filter, motor speed increase or decrease keys, and two or four position joysticks. EMAS control pendants are made of high-quality glass-fiber reinforced plastic. Control pendant advantages: • Designed for d22mm buttons • Cable outlet seal • Easy installation • Housing reinforced with acrylonitrile butadiene styrene copolymer • Mechanical protection against simultaneous operation in the opposite direction • Aesthetic design and ergonomic housing