Control unit EMAS PVK3E

PVK3E Control pendant 3 buttons (with arrows), single-speed, PVK series, plastic housing (250V AC, 4A), IP65 TECHNICAL INFORMATION Contact group 1NO x 3 Contact current (AC-15) 4A (250V AC) Utilization category AC15 Mechanical service life (minimum) 1,000,000 Electrical service life (minimum) 100,000 Insulation voltage (Ui) 300V Rated impulse voltage (Uimp) 2.5kV Dielectric strength (contact-to-body) 2,500 V AC Dielectric strength (contact-to-contact) 1,500 V AC Insulation resistance 10 MOhm (500V DC) Operating temperature -15 / + 80 °C Pollution degree 3 Protection class IP65 Contact material AgNi Cable connection cross-section 1.5-2.5mm2 Tightening torque 1.5Nm Short-circuit breaking capacity (Ics) 1kA PVK series Number of speeds 1 EMAS PVK series control pendants are designed for controlling cranes, jib cranes, electric hoists, chain and wire rope hoists, overhead and gantry cranes. These pendants can have several versions: two, three, four, five, six, seven, eight, nine, ten, eleven, and twelve buttons, and include emergency stop, emergency signal, signal, key switch, power on/off button, light filter, motor speed up/down keys, and two or four-position joysticks. EMAS control pendants are made of high-quality glass-fiber reinforced plastic, Advantages of control pendants: • Designed for d22mm buttons • Cable exit seal • Easy installation • Housing reinforced with acrylonitrile butadiene styrene (ABS) copolymer • Mechanical protection against simultaneous operation in opposite directions • Aesthetic design and ergonomic housing