Empty control panel with blanking plug Tipasom EMAS PV5X

Control station enclosure 5 buttons, empty, PV series, IP65 Product: Control station enclosure Type: 5-contact Contact current (Ie) 4 A (250 V AC) Utilization category: AC15 Mechanical service life (min. cycles) 1,000,000 Electrical service life (min. cycles) 100,000 Operating frequency (on/off per hour) Mech. 900 Elec. 900 Insulation voltage (Ui) 300 V Impulse withstand voltage (Uimp) 2.5 kV Dielectric strength (enclosure–contact) 2,500 V AC Dielectric strength (contact–contact) 1,500 V AC Insulation resistance 10 MΩ (500 V DC) Operating temperature -15 / +80 °C Pollution degree 3 Protection class IP65 Contact material AgNi Cable connection cross-section 1.5–2.5 mm² Tightening torque 1.5 Nm Short-circuit current (Ics) 1 kA Series – PV Type - Empty • Aesthetic appearance thanks to material containing ABS plastic • Ergonomic use and high impact resistance • Mechanical protection preventing simultaneous operation in opposite directions • Maximum resistance to environmental conditions thanks to the enclosure with a high protection class and sealed buttons • Arrow markings make it easier to determine direction • Single- and two-stage speed functions • Flexible cable conduit