C-shaped brace DSK 45 FT hot-dip galvanized OBO 6416500 LKS (OBO Bettermann group)

Spreader 80x45x40 mm 6416500 for US 5 rack and KU 7 VQP type traverse. The spreader is used to increase stability in all cases where traverse deformation is possible when tightening hex head through bolts. FT type protective zinc coating of the spreader is implemented according to DIN EN ISO 1461, by hot-dip galvanizing method (coating thickness on one side is not less than 60 μm, which is equivalent to 350-420 grams per sq.m of surface). Finished products are immersed in a molten zinc bath, whereby their surface and all joints are covered with a uniform layer of zinc. Parts galvanized in this way have a longer protection period under the same atmospheric exposure, and are also better protected against low chemical load, marine and urban air, and other atmospheric phenomena. FT type protective zinc coating when operating in the C3 zone according to the classification of corrosion action categories according to DIN EN ISO 12944, i.e. in zones with an average zinc consumption from 0.7 to 2.1 μm/year, will effectively resist corrosion for at least 30 years.