Reduction plug H 150 mm, L 200 mm, zinc-flake (hot-dip galvanized analog) URH052HDZL DKC

When designing and constructing cable routes based on the "U5 Combitech" heavy-duty industrial tray system, there is sometimes a need to connect trays of different widths. In this case, an adapter (or reduction) is used. A DKC reduction-plug is also used at the ends of the route as an end cap. The accessory is installed on the tray using fasteners - M6 nut (code CM100600) and M6x16 bolt (code CM010616). The reduction is designed for trays with a side height of 150 mm. Accessory length - 200 mm. Accessories in "Zinc-lamellar coating" execution have a coating based on magnesium resin with zinc and aluminum flakes and demonstrate better corrosion resistance than zinc coating of the same thickness, and are only slightly inferior to stainless steel.